We are very excited to announce that Art Clay are releasing a new sterling silver clay Art Clay 950 on 1st September! Metal clay tutor, Anna Campbell, gives you the low down.
What is it?
This is a new product from Art Clay, one of the two main suppliers of silver clay in the world. Silver clay is made up of fine silver particles, an organic binder and water. Art Clay 950 is 95% silver and 5% copper. The original Art Clay (the one we use in class) is a purer silver, 99% silver and 1% copper.
What are the benefits?
You might be thinking, well the original Art Clay is a purer silver so isn’t that better? The answer, of course, is it depends on what you want! Art Clay 950 is 60% stronger than original Art Clay because of the copper content. This means it is more suitable for making rings, bracelets etc and other items that might suffer more wear and tear.
In the UK silver up to 958 purity is hallmarked as sterling silver (925). Silver purity over 958 is considered Britannia silver (958), and over 990 is hallmarked as fine silver (999).
Sterling silver is recognised by UK consumers more than Britannia and fine silver and so for those of you hallmarking and selling your work this is a big plus.
Many of the clays on the market need to be mixed and kneaded before you can start work but this is pre-mixed, smooth and ready to use out of the packet (just like the original Art Clay).
At the time of writing, Art Clay 950 is slightly cheaper than original Art Clay.
The one downside for the hobby silver clay jeweller is that this clay does need to be kiln fired. This is the same with any of the sterling silver clays I have seen on the market. However, on the plus side this does not need to be done in carbon and if you have a programmable kiln this is easy to set up.
2. The firing schedule
- Once your piece is completely dry put it on a kiln shelf, in a cool kiln
- Heat up to 500C and hold for 30 minutes (this first step burns off the binder)
- Heat up to 850C and hold for 60 minutes (this final firing sinters the metal particles)
The kiln can heat up at full speed, and doesn’t need to cool off between the two stages. Avoid moving the piece after the first firing step as it will be fragile before sintering.
3. Using the clay
I haven’t yet had the opportunity to try it out and will report back on the blog when I do. However, I have heard from those who have used it that it has a longer drying time. This could be an advantage as we often want a little more time before our clay starts to dry out! For those who are interested in more information have a look at this clear and interesting blog post on 950 by Henriëtte van Battum
4. Where can I buy it?
Metal Clay Ltd currently have a pre-order available on their website of 25g and 50g packs, including 10% extra free. The clay is due to be shipped on 1st September 2016. We hope also to sell it in our pop up shop after the launch (which is open 7 days a week).
Art Clay 950 class at LJS
I am looking at creating an Art Clay 950 class that uses the clay to its advantages e.g. in making a ring. The class would not be for beginners but for intermediate and advanced metal clay makers. The challenges are the longer drying time and longer firing time meaning that it might be difficult to fit the class into our normal one day schedule. If you are interested in attending a class in Art Clay 950 please let us know via the comments below.